Total Liquidation of Mobile Fleet Solutions Public Auction

• Taxes/Tenant: $4926/yr. free of tenants
• Auction Date: April 4th, 2026 10am
• Auction Address: 6603 201st. st. Albia, Ia. 52531
• Terms: 10% down, 6% Buyer Premium on property
• Sellers: Mobil Fleet Solutions; Reserve the rights to accept, reject bids.
• Attorney: Nielsen Law, P.C. Todd G. Nielsen, 211 N. Maple St. Creston, Ia. 50801
• Auction Method: Lump Sum
• BP: Buyer Premium of 6% will be added to the hammer/sold price of the property due at closing
• Closing: will occur on or around May 12th, 2026
• Possession: @ closing or unless otherwise decided by both parties
• Contract: Immediately upon conclusion of auction, transfer of 10% earnest money to Todd Nielsen Trust account, signatures on purchase agreement.
• Auctioneer/Administrator: Jason Dent is serving solely on Auction Administrator/Auctioneer and is not representing the seller or buyer as a real estate broker or agent.
• As is Where is: All property is sold “As Is-Where is” basis with no warranties expressed or implied, made by the administrator, All American Auctions, seller or attorney(s)
• Septic System: new in 2013, will have clean transferrable report
• Property Inspections: by appointment only, call 515-231-5176
• Net acres: parcel 080423030000000, 1.78 acres, parcel 080726034000000, 1.26 acres
• Zoning: Commercial section 26 TWP 72 Rng 17
• County: Monroe
• Property Overview: South building (#1): From west to east, 75’x65′ (3) automatic commercial doors 17’x14′, currently pinned shut. Converted to Tennis and Basketball court, power unit & track there and in good shape; Center section 72’x45′ w/ 10’x16′ automatic commercial doors, (1) 18’x16′ automatic commercial door. All concrete floors, spray foam walls and ceilings, east section steel lowered finished ceiling, 7′ on center post construction, center floor drains, building is control temperature with security cameras. North Building 60’x90′, south rollup automatic commercial door 14’x18′ east commercial door 12’x14′, west commercial door 12’x14′, w/ 1459 sq. ft. finished office space.

This sale is subject to all easements, covenants, leases, and restrictions of record. All property is sold on an “As is-Where is” basis with no warranties, expressed or implied, made by the Auctioneer, All American Auctions Inc., or seller. All bids will be on a lump sum basis. The winning bidder acknowledges that they are representing themselves in completing the auction sales transaction. Any announcements made on auction day by the Auctioneer will take precedence over all previous marketing material or oral statements. Bidding increments are at the sole discretion of the Auctioneer. All decisions of the Auctioneer are final. All field boundaries are presumed to be accurate according to the best available information and knowledge of the Seller and All American Auctions Inc. Overall acres, etc. may vary from figures stated within the marketing material. Buyer should perform his/her own investigation of the property prior to bidding at the auction. The brief legal descriptions in the marketing material should not be used in legal documents. Full legal descriptions will be taken from abstract.

Equipment

• Sky Jack SJ111 3219, 20′ 24v, 2400 lb. lift, S#22084663; 85″ CAT Skid loader bucket near new
• 85″ M&M grapple bucket HD
• 72″ Takauchi smooth bucket
• Universal skid loader quick attach plate
• 14’x82″ Heartland utility trailer, 5 bolt axels
• 14’x82.5″ Hull trailer (new leaf springs and hubs) 6 bolt wheels, fork pockets
• 1998 Dodge Ram 1500, 4×4, 5.9L V8 gas, VIN:1B7HF1625WS626847
• CAT 279 D3 Track skid loader, 318 hrs., VIN: CAT0279DCRB906419, loaded cab, 2023, 79″ bucket
• WS-20 M&M skid loader log splitter, 29″ stroke
• CAT 351 skid loader pallet forks
• Bandit Intimidator 18xp, 712 hrs., 2022, 18″ whole tree chipper, hydraulic jack, fully hydraulic, gas Ford engine, hydraulic winch, model TP12KC-DN, 12k auto lift, 110.5″ narrowest part, 14′ tall

Tools

• Power Pro 28 ton, Briggs & Stratton 10 hp motor, pull type log splitter
• (2) Norco portable air lift jack, 10 ton
• Transmission jack
• OReilly sae 15w-40 diesel engine oil
• pallet racking
• Thermal Dynamics cut master, 82, model yr. 2010, S#05731241, SL 60 stinger
• propane torch set complete w/ Firepower WH411C-FP cut head
• oxygen acetylene complete w/ IOxygen 6Z22 cut head
• backpack Victor bottles
• Pittsburgh portable tool case and tools
• 20-ton press stand
• King 20 gal. mobile Porte washer
• welding table
• C clamps
• 16-ton hydraulic pipe bender
• (2) Firestone 11R 24.5 14 ply new truck tires
• Firestone 11R 22.5 new
• Milestar 11R 22.5 16 ply new
• Continental 11R 22.5 load range G
• Coats 6450 laser guided direct drive balance machine
• Coats RC-55 Rim clamp tire machine, air hold down, bead breaker
• Power Torque 1 ton HD low pro Tranny jack
• Atlas WB-11 digital tire balancer
• (2) Hannay reels on stainless cages w/ 50 gal. water tanks
• Hannay reels on stainless cage w/ 300 gal. tank
• Ford Motor block
• Better Built HD 110 gal. fuel cell
• Warn electric basketball hoops complete
• Hobart wire feed welder, 210 MBP 115/230 volt
• Gates HYD. crimping machine w/ high pressure hydraulic hose w/ Hitachi cut-off saw, 1/4″ through 1 1/4″, and misc. fittings, sold as unit
• Pittsburgh heavy duty 1 ton engine stand
• new and used pick-up tires
• Generac RS7000E gas powered generator, 120/240 volt electric pull start, OHV420CC
• Robinair Cool-Tech 34988 A/C Recover, Recycle, Recharge machine
• load binders; log chains; jumper cables; heavy duty extension cords
• 300 gal. water tank, Minnesota Wanner Co.
• Hotsy pressure washer model #980A, pressure 2000 PSI, 5hp single phase, 230 volts
• 16′ Texas Bragg trailer, 2 axle, wood plank floor, 6.5′ wide
• (33) oil dry bags
• oil pump
•  (2) Porta Power complete
• NAPA- T04 sae 30w hydraulic oil, (2) 5 gal. buckets partially full
• Syngard synthetic motor oil, (2) 5 gal. buckets partially full
• misc. oils; antifreeze; and chemicals
• Pittsburgh 40″ Creeper, 300 lb. capacity
• multiple size Hyd. bottle jacks
• heavy duty jack stands
• Lincoln battery powered grease gun
• Dewalt battery powered grease gun
• Maddox bearing race & seal driver set, #MD10-1, Everough, engine block tester #67094
• #12800 Lisle Master pneumatic bearing race and seal driver set
• Harmonic balancer puller, OEM #27019
• Pittsburgh puller/bearing separator set
• Gates flat face plug and cap assortment
• Morse Advanced Edge hole saw set
• gear and bearing pullers, Posilock model 110 (1), and 2 others
• NAPA floor jack
• pintle hitches
• trailer hitches
• bolt bins
• Pittsburgh 1.5-ton floor jack
• rolling US General tool chest, 6 drawer, 33″x22″Lx46″ H, w/ electric outlets, like NEW
• rolling US General tool chest, 33″w x 22″L x 46″ H, like NEW
• Pittsburgh heavy duty 2-ton folding engine crane
• 1″ drive IR air impact wrench
• Werner 8′ fiberglass ladder
• Pittsburgh 1-ton heavy duty engine stand
• many socket sets and hand tools
• ATD 1/2″ dr. torque wrench 30-250′ lbs.
• 48″ Master force jobsite storage box, 16 cu. ft. capacity, 48W x 28H x 24 deep
• ATD 3/8″ dr. torque wrench
• Made in USA Associated battery charger on wheels, model #US20, 40/10-amp 6/12-volt, 200-amp 12-volt engine start
• Kobalt 20 drawer rolling toolbox, 40W x 18D x 64H
• Pittsburgh engine support bar, 1000 lb. capacity
• shop light, adjustable height, Master Electrician brand
• misc. hydraulic fittings
• Carlyle torque wrench, 3/4 drive, CTW34 AH180092, 120-600 lb. ft.
• Performance tool brand slide hammer puller set
• Icon aluminum bearing and seal driver set
• Pittsburgh Pro 3/4″ drive standard impact sockets
• Irwin Hanson, 76-piece Tap & Die super set, #4-#12/ 1/4″-1/2″, 3mm-12mm
• Astro Snap ring pliers set
• many open end and box end wrench sets
• many pliers
• assorted pipe wrenches
• assorted air tools
• assorted sockets
• US General Series 3 rolling tool chest w/ side mount box w/ keys, 72″W x 22″ deep x 70″ H
• metal shelving, 4’W x 6’H x 2′ deep
• asst. gas cans
• (8) 65″W x 24″D x 24″ H metal tables w/ 1″ wood tops
• (6) fuel containers, 5 gal., diesel, gas, kerosene
• Dewalt 10″ chop saw
• Skil 4″x3″ belt/disc sander
• (2) new Yokohama 33×12.5 R20LT
• (2) new 235/75R 17.5 Ironhead truck tires
• (2) new 225/70R 19.5 Ironhead truck tires
• misc. used tires
• metal tire rack 7’x8′
• (4) interlocking shop mats